
CL1008 / CL1016 User Manual
F3: SET
This function allows the administrator and each user to set up their own, individual, working environment. A separate profile for each is stored by the OSD and is activated according to the username provided during login.
To change a setting:
1.Double click it; or move the highlight bar to it, then press [Enter].
2.After you select an item, a submenu with further choices appears. To make a selection, either double click it; or move the highlight bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the following table:
Setting | Function |
|
|
OSD HOTKEY | Selects which hotkey activates the OSD function: |
| [Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl]. |
| Since the [Ctrl] key combination may conflict with programs running |
| on the computers, the default is the [Scroll Lock] combination. |
|
|
PORT ID | Allows you to position where the port ID appears on the monitor. |
DISPLAY | The default is the upper left corner, but you can have it appear |
POSITION | anywhere on the screen. |
| Use the mouse or the arrow keys to position the port ID display, |
| then click or press [Enter] to lock the position and return to the Set |
| submenu. |
|
|
PORT ID | Determines how long a port ID displays on the monitor after a port |
DISPLAY | change has taken place. The choices are: User Defined – which |
DURATION | lets you select the amount of time (from |
| On – which displays the port ID at all times. If you select User |
| Defined, key in the number of seconds, then press [Enter]. The |
| default is 3 Seconds. A setting of 0 (zero) disables this function. |
|
|
| (Continues on next page.) |
26