
CL1008 / CL1016 User Manual
Hotkey Beeper Control
The beeper can be hotkey toggled on and off (see ACTIVATE BEEPER, page 29). To toggle the beeper, key in the following hotkey combination:
1.Invoke Hotkey mode (see page 35).
2.Press [B]
After you press B, the beeper toggles on or off. The command line displays Beeper On or Beeper Off for one second; then the message disappears and you automatically exit Hotkey mode.
Hotkey Summary Table
[Num Lock] + | [Port ID] [Enter] | Switches the KVM focus to the computer that |
|
| corresponds to that port ID |
|
|
|
| [T] [n] [Enter] | Sets the Auto Scan interval to n seconds – where |
|
| n is a number from |
|
|
|
| [A] | Invokes Auto Scan mode. |
|
| When Auto Scan mode is in effect, [P] or left |
|
| click pauses auto scanning. |
|
| When auto scanning is paused, pressing P or |
|
| left clicking again resumes auto scanning. |
|
| Note: Pressing almost any of the typewriter keys |
|
| (letters, numbers, Enter, Esc, Spacebar, etc.), will |
|
| resume scanning. |
|
|
|
| [←] | Skips from the current port to the first accessible |
|
| port previous to it. (See SCAN/SKIP MODE, p. 27, |
|
| for information regarding accessible ports.) |
|
|
|
| [→] | Skips from the current port to the next accessible |
|
| port. |
|
|
|
| [↑] | Skips from the current port to the last accessible |
|
| port of the previous station. If you are at a port on |
|
| the first station you cycle backward to the last |
|
| accessible port on the last station. |
|
|
|
| [↓] | Skips from the current port to the first accessible |
|
| port of the next station. If you are at a port on the |
|
| last station you cycle forward to the first accessible |
|
| port on the first station. |
|
|
|
| [B] | Toggles the beeper on or off. |
|
|
|
40