
Appendix
5.Slide the switch open and closed a couple of times to be sure that it is properly aligned and operating smoothly. (See page 13 for opening and closing procedures.)
6.After determining that the switch is properly lined up and operating correctly, finish up by fully tightening down the partially tightened front attachment screws inserted in step 3.
OSD Factory Default Settings
The factory default settings are as follows:
Setting |
| Default |
|
| |
OSD Hotkey | [Scroll Lock] [Scroll Lock] | |
|
| |
Port ID Display Position | Upper Left Corner | |
|
|
|
Port ID Display Duration | 3 | Seconds |
|
| |
Port ID Display Mode | The Port Number plus the Port Name | |
|
|
|
Scan Duration | 5 | Seconds |
|
| |
Scan/Skip Mode | All | |
|
|
|
Screen Blanker | 0 | (Disabled) |
|
|
|
Logout Timeout | 0 | (Disabled) |
|
| |
Beeper | Y (Activated) | |
|
| |
Accessible Ports | F (Full) For all Users on all Ports | |
|
|
|
59