ATEN Technology CN-5000 user manual AP Operation

8. AP Operation

An explanation of the Customization items is given in the table below:

Uploads	After obtaining a new version of the firmware, click Browse
	to navigate to the directory that you have put it in.
Time out control	If the CN-5000 doesn’t receive any input from a logged in user
	for the amount of time specified here, it ends the connection.
Login failure	￿ Login failures allowed, sets the number of consecutive
	failed login attempts that are permitted from a remote
	computer.
	￿ Login failure timeout, sets the amount of time a remote
	computer must wait before attempting to login again after
	it has exceeded the number of allowed failures.
Working mode	￿ If Stealth Mode is enabled, the CN-5000 cannot be
	pinged.
	￿ If Echo Mode is disabled, the CN-5000 will not show up
	in the list of local CN-5000 units (see p. 48 and p. 67).
	￿ If Enable Browser isn’t enabled, the CN-5000 cannot be
	accessed via a browser.
Multiuser operation	Placing a check here allows multiple users to access the
	CN-5000 at the same time. Up to 16 users can log in at the
	same time this way.
Reset on exit	Placing a check here causes the CN-5000 to reset itself
	and implement all the new changes when you Click OK.

63

2005-12-29