ATEN Technology CN-5000 user manual Disconnect to break the connection

CN-5000 User Manual

A description of the Connection Screen is given in the following table:

Menu Bar	The Menu Bar contains three items: File, Tools, and Help.
	1. The File Menu allows the operator to Create, Save, and
	Open user created Work files (see p. 69 for details).
	2. The Tools Menu contains two entries: Keyboard and
	Config, (see p. 30 for details).
CN-5000 List:	Each time CN5KClient.exe is run, it searches the User’s
	local LAN segment for CN-5000 units, and lists whichever
	ones it finds in this box. If you want to connect to one of
	these units, Double Click it.
CN-5000 IP:	This area is used when you want to connect to a CN-5000 at
	a remote location. You can drop down the list box and select
	an IP address or key in an IP address if the one you want isn’t
	listed, then key in the Port number in the Port field. If you
	don’t know the Port number contact the Administrator.
	When the IP address and Port number for the CN-5000 unit you
	wish to connect to has been specified, Click Connect to start
	the connection. When you have finished with your session, Click
	Disconnect to break the connection.
Message List:	Lists status messages regarding the connection to the
	CN-5000.
Switch to Remote	Once contact with a CN-5000 has been established, this
View	button becomes active. Click it to switch and take over
	console control of the unit that is attached to the CN-5000.
	The screen output of the unit appears on your monitor.
	Your keystrokes and mouse movements are captured and
	sent to the CN-5000 to be executed on the attached unit.
	If the CN-5000 is connected to a KVM switch, you can control
	the switch and the computers connected to it just as if you
	were connected locally.
Change Password	This button becomes active after a connection to a
	CN-5000 unit has been established. It allows the User to
	change the password he logs onto the CN-5000 with.

68

2005-09-13