ATEN Technology CS-1708 user manual F4 ADM

OSD Operation

F4 ADM:

F4 is an Administrator only function. It allows the Administrator to configure and control the overall operation of the OSD. To change a setting Double Click it; or use the Up and Down Arrow Keys to move the highlight bar to it then press [Enter].

After you select an item, a submenu with further choices for you to select from appears. Double Click the choice you want, or move the Highlight Bar to it then press [Enter]. An icon appears before the selected choice so that you know which one it is. The settings are explained in the following table:

Setting	Function
SET	This function is used to set Usernames and Passwords for the
USERNAME	Administrator and Users:
AND
PASSWORD	1. Usernames and Passwords for one Administrator and four
	Users can be set.
	2. After you select one of the User fields or the Administrator field,
	a screen that allows you to key in a Username and Password
	appears. The Username and Password may be up to 12
	characters long, and can consist of any combination of letters
	and numbers (A - Z, 0 - 9).
	3. For each individual, key in the Username and Password, then
	press [Enter].
	4. To modify or delete a previous Username and/or Password,
	use the backspace key to erase individual letters or numbers.
SET LOGOUT	If there is no input from the console for the amount of time set with
TIMEOUT	this function, the Operator is automatically logged out. A login is
	necessary before the console can be used again. This enables
	other Operators to gain access to the computers when the original
	Operator is no longer accessing them, but has forgotten to log out.
	To set the timeout value, key in a number from 1 - 180 minutes,
	then press [Enter]. If the number is 0 [zero], this function is disabled.
	Default is 0.

(Table continues on next page)

29.

2004-04-27