F5 SKP:Skip (SKP) Mode enables you to easily skip backward or forward - switching the
console focus from the currently active computer port to the previous or next
available one.
wThe selection of computers to be available for Skip Mode switching is made
with the Scan/Skip Mode setting under the F3 SET function (see p. 28).
wWhen you are in Skip Mode, press [ ← ] to switch to the previous computer
in the List; press [ → ] to switch to the next computer in the List; press [ ↑ ]
to switch to the last computer on the previous station in the List; press [ ↓ ]
to switch to the first computer on the next station in the List.
Note: When you Skip, you only Skip to the previous or next available
computer that is in the Scan/Skip Mode selection (see p. 28).
wIf a Port has been selected for Scan/Skip Mode, when the focus switches to
that port a Left/Right Triangle symbol appears before its Port ID Display to
indicate so.
wWhile Skip Mode is in effect, the console will not function. You must exit
Skip Mode in order to regain control of the console.
wTo exit Skip Mode, press the [Spacebar] or Esc.
2004-04-27
OSD Operation
33.