(Continued from previous page.)
Setting | Function |
|
|
PORT ID | Selects how the Port ID is displayed: the Port Number alone |
DISPLAY | (PORT NUMBER); the Port Name alone (PORT NAME); or the |
MODE | Port Number plus the Port Name (PORT NUMBER + PORT |
| NAME). The default is PORT NUMBER + PORT NAME). |
|
|
SCAN | Determines how long the focus dwells on each port as it cycles |
DURATION | |
| page 32). Key in a value from 1 - 255 seconds, then press [Enter]. |
| Default is 5 seconds; a setting of 0 disables the Scan function. |
|
|
SCAN/SKIP | Selects which computers will be accessed under Auto Scan Mode |
MODE | (see F7 SCAN, page 32). Choices are: |
| |
| |
| POWERED ON - Only those Ports which have been set Accessible |
| and are Powered On; |
| QUICK VIEW - Only those Ports which have been set Accessible |
| |
| VIEW PORTS, page 31); |
| QUICK VIEW + POWERED ON - Only those Ports which have |
| been set Accessible and have been selected as Quick View Ports |
| and are Powered On. The default is ALL. |
| Note: The Quick View choices only show up on the administrator's |
| screen, since only the administrator has Quick View setting rights |
| (see SET QUICK VIEW PORTS, page 31, for details). |
|
|
SCREEN | If there is no input from the console for the amount of time set with |
BLANKER | this function, the screen is blanked. Key in a value from |
| 1 - 30 minutes, then press [Enter]. A setting of 0 disables this |
| function. The default is 0 (disabled). |
|
|
HOTKEY | Enables / Disables the Hotkey function (see Hotkey Operation, |
COMMAND | page 35) in case there is a conflict with programs running on the |
MODE | computers. On enables the function, Off disables it. The default is |
| On. |
|
|
28