4. OSD Operation
(Continued from previous page.)
Setting | Function |
|
|
SET QUICK | This function lets the administrator select which Ports to include as |
VIEW PORTS | Quick View ports. |
| Note: Only the Ports currently chosen for the LIST view on the |
| |
| To select/deselect a port as a Quick View Port, use the |
| Navigation Keys to move the highlight bar to it, then press |
| [Space]. |
| When a port has been selected as a Quick View Port, an |
| arrowhead displays in the QV column of the LIST on the Main |
| Screen to indicate so. When a port is deselected, the arrowhead |
| disappears. |
| If one of the Quick View options is chosen for the LIST view (see |
| F2 LIST, page 26), only Ports that have been selected here will |
| show up on the LIST display on the main OSD screen. |
| If one of the Quick View options is chosen for Auto Scanning |
| (see SCAN/SKIP MODE, page 28), only Ports that have been |
| selected here will be Auto Scanned. |
| The default is for no ports to be selected. |
|
|
SET | This function allows the administrator to define user access to the |
ACCESSIBLE | computers on the installation on a |
PORTS | user, select the target Port; then press the [Spacebar] to cycle |
| through the choices: F (Full access), V (View Only) or blank. |
| Repeat until all access rights have been set, then press [Esc]. The |
| default is F for all users on all Ports. |
| Note: A blank setting means that no access rights are granted. The |
| Port will not show up on the user's LIST on the Main Screen. |
|
|
FIRMWARE | In order to upgrade the |
UPGRADE | chapter 5), you must first enable Firmware Upgrade Mode with this |
| setting. |
|
|
SET PORT OS | Specifies the operating platform of the computer attached to each |
| port. For each port, press the [Spacebar] to cycle through the |
| choices (PC Compatible, Sun, and Mac). Repeat until all the ports |
| have been set, then press [Esc]. The default is PC Compatible. |
|
|
31