CS428 User Manual

F5 ADM:

F5 allows an Administrator to configure the OSD operation of the Console. To change a setting Double Click it; or use the Up and Down Arrow Keys to move the highlight bar to it then press [Enter].

Note: 1. To avoid Administrator conflict, a priority system has been set up in which, by default, Console 1 has priority over anything attached to Port 1; Console 2 has priority over anything attached to Port 2; Console 3 has priority over anything attached to Port 3; and Console 4 has priority over anything attached to Port 4.

2.Only one Administrator may access the F5 ADM (Administrator) function at a time. If a second Administrator attempts to access the F5 function while it is already being accessed, he is denied access, and a message appears on screen to inform him of the rejection.

After you select an item, a submenu with further choices for you to select from appears. Double Click the choice you want, or move the Highlight Bar to then press [Enter]. An icon appears before the selected choice so that you know which one it is. The settings are explained in the following table:

Setting

 

Function

 

 

SET PASSWORD

This function is used to set passwords for the Administrator

 

and User:

 

1.

One Administrator and four User passwords can be set.

 

2.

Move the highlight bar to User or Administrator, then press

 

 

[Enter]. A screen that allows you to key in your password

 

 

appears. The password may be up to 8 characters long,

 

 

and can consist of any combination of letters and numbers

 

 

(A - Z, 0 - 9).

 

3.

Key in the new password, then press [Enter]. You are

 

 

asked to key the password in again, in order to confirm

 

 

that it is correct.

 

4.

Key in the new password again, then press [Enter]. If the

 

 

two entries match, the new password is accepted. If the

 

 

entries do not match, you must start again from the

 

 

beginning.

 

5.

To modify or delete a previous password, use the

 

 

backspace key to erase individual letters or numbers.

 

6.

If the Administrator wants to change a User's password,

 

 

he must enter his Administrator's password first.

 

 

 

20