![](/images/backgrounds/133916/133916-4131x1.png)
4. OSD Operation
(Continued from previous page.)
Setting | Function |
|
|
SCAN DURATION | Determines how long the display dwells on each port when it |
| cycles through the selected ports in Quick View Scan Mode. |
| Key in a value from 1 - 255 seconds, then press [Enter]. |
| Default is 3 seconds. |
|
|
PRIVATE MODE | The [Enter] key is a toggle that Enables/Disables Private |
| Mode for the currently selected port. When Private Mode is |
| Enabled, none of the other Consoles cannot access the port, |
| and their monitors show a blank screen when they come to it. |
| If another console tries to access the port, the message: |
| Private Mode: Console x (where x represents the number of |
| the console that has set private mode for the port), displays |
| on its screen. |
| When you have finished making your selections, press [Esc] |
| to return to the OSD Main Menu. |
|
|
RESTORE DEFAULT | This function is used to undo all User changes and return the |
VALUES | setup to the original factory default settings - except for the |
| Names that were assigned to Ports, which are retained. |
|
|
MOUSE BUTTON | This function allows you to set the mouse for right or left |
SETUP | handed operation. Use [Enter] to toggle between the two. |
|
|
SET PASSWORD | This function is for Users to set their passwords: |
| 1. When you access this function, if you already have a |
| password you must enter it in order to continue. |
| 2. A screen appears that allows you to key in your new |
| password. The password may be up to 8 characters long, |
| and can consist of any combination of letters and numbers |
| (A - Z, 0 - 9). |
| 3. To modify or delete a previous password, use |
| [Backspace] to delete the characters. |
| 4. Key in the password, then press [Enter]. You are asked to |
| key the password in again, in order to confirm that it is |
| correct. Key in the new password again, then press |
| [Enter]. |
| If the two entries match, the new password is accepted. If |
| the entries do not match, you must start again from the |
| beginning. |
|
|
23