CS82U / CS84U User Manual

No.

Component

Description

 

 

 

1

Port

For manual port selection:

 

Selection

Š Press and release a port selection pushbutton to bring the

 

Pushbuttons

KVM focus to the computer attached to its corresponding

 

 

 

 

port. The Port LED lights bright orange.

 

 

Š Press and hold port selection pushbutton 1 and 2 for more

 

 

than 2 seconds to start Auto Scan Mode, see page 16 for

 

 

details.

 

 

Š Press and release either port selection pushbutton (1 or 2)

 

 

to stop Auto Scan Mode. The KVM focus goes to the com-

 

 

puter attached to the corresponding port of the switch you

 

 

pressed.

 

 

Š Press port selection pushbuttons 3 and 4 simultaneously

 

 

for 2 seconds to perform a keyboard and mouse reset

 

 

(CS84U only).

 

 

 

2

Port LEDs

The Port LEDs are built into the Port Selection Switches.

 

 

KVM

 

 

Š Lights DIM ORANGE to indicate that the computer

 

 

attached to the corresponding port is up and running (On

 

 

Line).

 

 

Š Flashes to indicate that Firmware Upgrade mode is in

 

 

effect.

 

 

Š Changes to BRIGHT ORANGE to indicate that the com-

 

 

puter attached to its corresponding port is the one that has

 

 

the KVM focus (Selected).

 

 

Š Flashes to indicate that the computer attached to its corre-

 

 

sponding port is being accessed under Auto Scan mode.

 

 

 

6