CS82U / CS84U User Manual
Hotkey Buzzer Control
The Buzzer can be hotkey toggled on and off. To toggle the Buzzer, do the following:
1.Invoke HSM (see page 17).
2.Press and release [B].
The Buzzer toggles on or off.
Disable Port Switching Keys
To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]), do the following:
1.Invoke HSM (see page 17).
2.Press [X] [Enter].
Note: This procedure is a toggle. To enable the Port Switching keys repeat steps 1 and 2.
Firmware Upgrade Mode
To set the CS82U / CS84U to Firmware Upgrade Mode, do the following:
1.Invoke HSM (see page 17).
2.Key in: upgrade
3.Press [Enter].
All front panel LEDs (green and orange) flash to indicate Firmware Upgrade Mode is in effect.
Note: To exit Firmware Upgrade Mode, you must power off the switch.
Restore Default Settings
To reset the CS82U / CS84U to its default hotkey settings, do the following:
1.Invoke HSM (see page 17).
2.Press [R] [Enter].
20