CS9134 / CS9138 User Manual
F3 LISTThis function lets you broaden or narrow the scope of which ports the OSD lists. On the submenu that appears, an icon of a pointing finger indicates the currently selected choice. To change a setting, move the highlight bar to the choice you want, then press [Enter]. An explanation of the settings is given in the table below:
Choice | Meaning |
|
|
ALL | Lists the Port ID numbers and Names (if names have |
| been specified - see F5, below), of all the ports on the |
| installation. |
|
|
QVIEW | Lists only the ports that have been selected for Quick |
| View scanning (see F4, below). |
|
|
POWERED ON + QVIEW | Lists only the ports that have been selected for Quick |
| View scanning (see F4, below), and that have their |
| attached computers Powered On. |
|
|
QVIEW + NAME | Lists only the ports that have been selected for Quick |
| View scanning (see F4, below), and have been assigned |
| names (see F5, below). |
|
|
NAME | Lists only the ports that have been assigned names (see |
| F5, below). |
|
|
POWERED ON | Lists only the ports that have their attached systems |
| Powered On. |
|
|
Note: 1. You can access any port on any list by using the Navigation Keys then pressing [Enter].
2.If you select a port that does not have a computer attached to it, or if the attached system is powered Off, the OSD will still switch to it, and will not show an error.
F4 QVQV lets you select which ports you want to include for automatic scanning under the Quick View Scanning function (see F2, above).
[F4] is a toggle. To select/deselect a port, move the highlight bar to it, then press [F4]. When a port has been selected, an arrowhead displays in the QV column to indicate so. When a port is deselected, the arrowhead disappears.
24