CS9134 / CS9138 User Manual

Factory Default Settings

The factory default settings are as follows:

Setting

Default

 

 

Display Duration

Always On

 

 

Display Mode

The Port Number plus the Port Name

 

 

Scan Duration

3 Seconds

 

 

OSD Security

In order to prevent unauthorized access to the systems, the OSD provides a password security feature. If a password has been set, the OSD will request that the user specify it before allowing entry.

Setting a New Password

To set a new password:

1.Press [F6] to bring up the setup configuration menu.

2.Move the highlight bar to SET PASSWORD, then press [Enter].

a)If this is the first time this function is being used by the administrator, the screen displays ENTER PASSWORD. Simply press [Enter] to move on.

b)Otherwise, the screen displays NEW PASSWORD.

3.Key in the new password, then press [Enter].

The password may be up to 8 characters long, and can consist of any combination of letters and numbers (Aa - Zz, 0 - 9).

4.Key in the new password again, in order to confirm that it is correct, then press [Enter].

If the two entries match, the new password is accepted and the screen displays the following message:

SET PASSWORD OK

If the entries do not match, the screen displays the message:

PASSWORD NOT MATCH

28