4. OSD Operation
Setting | Function |
|
|
CLEAR THE | Clears all Port Names from the Name List. You are asked |
NAME LIST* | to confirm before the procedure goes on. Key in Y, then |
| press [Enter] to confirm. While the names are being |
| cleared, a message appears on the display to indicate so. |
| After the names have been cleared, another message |
| appears to indicate that the procedure completed |
| successfully. |
|
|
RESTORE DEFAULT | Clears all settings from memory, and returns the unit to the |
VALUES* | factory default settings (see OSD Factory Default Settings, |
| page 32). You are asked to confirm before the procedure |
| goes on. Key in Y, then press [Enter] to confirm. While the |
| settings are being cleared, a message appears on the |
| display to indicate so. After the settings have been |
| cleared, another message appears to indicate that the |
| procedure completed successfully. |
|
|
LOCK CONSOLE* | Locks / Unlocks the Console. When the Console is locked, |
| only the current monitor screen displays. Attempts to input |
| information from the console have no effect; attempts to |
| switch to a different port, either from the Console or by |
| pressing the manual switches, have no effect either. The |
| only way to regain access to the systems is by Unlocking |
| the Console. If a password has been set, you must provide |
| the password in order to Lock / Unlock the Console. If no |
| password has been set, pressing [Enter] will Lock / Unlock |
| the Console. |
|
|
*If a password has been set, this setting requires you to supply it in order to gain access. See SET PASSWORD, page 26, and OSD Security, page 28, for details.
27