Chapter 5. EC2004 Browser Operation

ŠSNMP Trap Receivers

Up to four SNMP management stations can be specified. If you want to use SNMP trap notifications, do the following:

1.Check Enable SNMP Trap.

2.Select the type: SNMPv3, SNMPv2c, or SNMPv1.

3.For SNMPv3 key in the Receiver IP(s), User name(s), Auth- password(s), Priv-password(s) and Service Port number(s) of the computer(s) to be notified of SNMP trap events. The valid port range is 1–65535. The default port number is 162.

4.For SNMPv2c and SNMPv1 key in the Receiver IP(s), Community(s), and Service Port number(s) of the computer(s) to be notified of SNMP trap events. The valid port range is

1–65535. The default port number is 162.

75