EC1000 / EC2004 User Manual
Item | Description |
|
|
F/W Version | Displays the EC2004 ‘s current firmware version. |
|
|
Filename | As new versions of the firmware become available, they are |
| posted on our website and can be downloaded to a convenient |
| location on your computer. Click the Browse button to select the |
| downloaded upgrade file. |
|
|
Upgrade | Click this button to upgrade the firmware of the selected devices. |
|
|
Upgrading the Firmware
To upgrade the firmware refer to the screen shot on the preceding page, and do the following:
1.Go to our website and download the new firmware file to a convenient location on your computer.
2.Click the Browse button; navigate to where the firmware file is located and select it.
3.Click Upgrade to start the upgrade procedure.
If you enabled Check Main Firmware Version the current firmware level is compared with that of the upgrade file. If the current version is equal to or higher than the upgrade version, a popup message appears, to inform you of the situation and stops the upgrade procedure.
If you didn't enable Check Main Firmware Version, the upgrade file is installed without checking what its level is.
Once the upgrade completes successfully, the EC2004 resets itself.
4.Log in again, and check the firmware version to be sure it is the new one.
Firmware Upgrade Recovery
Should the EC2004’s firmware upgrade procedure fail, and the device becomes unusable, the following firmware upgrade recovery procedure will resolve the problem:
1.Power off the device.
2.Press and hold the Reset Switch (see page 7).
3.While holding the Reset Switch in, power the switch back on.
This causes the switch to use the original factory installed main firmware version. Once the switch is operational, you can try upgrading the main firmware again.
88