Changing the Scan Interval

Before you invoke Auto Scan, you can change the amount of time that Auto Scan dwells on each port (the time interval), with the following hotkey combination:

[Left shift] [Right shift] [S] [n]

Where n represents a number from 1 to 4 that specifies the desired scan interval time, as shown in the table below;

nScan Interval

13 secs

25 secs

310 secs

420 secs

Note: Press and release the keys one at a time.

LED Display Table

Activity

Indication

Off

Port is not selected.

 

 

On (Steady)

The computer connected to the LED’s

 

corresponding port is the one that has the KVM

 

focus.

 

 

Flashing (On and Off equal)

The computer connected to the LED’s

 

corresponding port is the one that has the KVM

 

focus and is being accessed in Auto Scan mode.

- 8 -

2003-06-20

Page 10
Image 10
ATEN Technology KVM CS-62 user manual LED Display Table, Changing the Scan Interval