Installation
1.Before you begin, make sure that power to all the
devices you will be connecting up have been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function. Otherwise, the switch will receive power from the computer.
2.To prevent damage to your installation due to ground potential difference, make sure that all devices on the installation are properly grounded.
Refer to the Installation diagram on the next page as you perform the following steps:
1.Plug your keyboard, monitor, and mouse into the appropriate Console ports of the
2.Plug the keyboard, monitor, and mouse connectors of the attached KVM cables into their respective ports on the computers you are installing.
3.Turn on the power to the computers.
Note: The
- 5 -
