SN0108 / SN0116 User Manual

SSH

Terminal Session (Linux):

1.Open a terminal (command line) on your computer.

2.At the prompt, key in your SN0108 / SN0116 Username and the SN0108 / SN0116's IP Address in the following way:

SSH [username@IP Address]

Note: The default SSH port is 22. If that port is already being used, up to 16 additional users can log in by adding a port number (from 5100 to 5115) to the login command. For example:

SSH [username@IP Address] -P 5101

3.Press Enter

4.When you are prompted for a password, use your SN0108 / SN0116 password.

Once an SSH connection to the device is established, the SN0108 / SN0116 Main Menu comes up:

This menu is the same as the main menu that appears with Telnet sessions (see p. 47 for Telnet operation).

68