Read Commands
View information from the device using the following command:
Read Command + Port + Control [Enter]
The following tables show the possible values and formats for the Control command:
Command | Description |
|
|
|
|
read | Reads and displays information | |
| from the VM0404H | |
|
|
|
The following table shows the available command list:
Command | Enter | Description |
|
|
|
|
|
read | [Enter] | Displays information such as | |
|
| firmware version and EDID |
|
Echo Commands
If the Echo feature is enabled: for each action from the front panel (pushbuttons) or IR interface, the VM0404H sends a corresponding acknowledgement message to the attached controller or management device via the
The formula for the Echo command is as follows:
Echo Command + Control (on/off) + [Enter]
For example, to enable the Echo function, type the following:
echo on [enter]
The following tables show the possible values for commands:
Command | Description |
|
|
echo | Enable / Disable Echo function |
|
|
|
|
Control | Description |
|
|
on | Echo function on |
|
|
off | Echo function off (default) |
|
|
The following table shows the available command list:
Command | Control | Enter | Description |
|
|
|
|
echo | on | [Enter] | Echo on |
|
|
|
|
echo | off | [Enter] | Echo off |
|
|
|
|
- 14 -