Panel Button Control Commands
The formula for Panel Button commands is as follows:
Panel Button Command + Control + [Enter]
For example, to enable the front panel pushbuttons, type the following: button on [Enter]
The following tables show the possible values for commands:
Command | Description | |
|
|
|
button | Front panel pushbutton enable/ | |
|
| disable control |
|
|
|
|
|
|
Command | Control | Description |
|
|
|
button | on | Enable front panel pushbuttons |
|
| (default) |
|
|
|
button | off | disable front panel pushbuttons |
|
|
|
The following table shows LED behavior under this command:
| Buttons Disabled | Buttons Enabled |
|
|
|
All output on | LEDs flash every second | LEDs on |
|
|
|
All output off | No LEDs | No LEDs |
|
|
|
Output on and Off | On – flash every second; | On – LEDs on; Off – |
| Off – no LEDs | LEDs off |
|
|
|
- 18 -