ATEN Technology VS1814T, VS1818T Grounding

Chapter 2. Hardware Setup

Grounding

To prevent damage to your installation, it is important that all devices are properly grounded.

1.Use a grounding wire to ground the VS1814T / VS1818T by connecting one end of the wire to the grounding terminal, and the other end of the wire to a suitable grounded object.

2.Make sure that all devices in your VS1814T / VS1818T installation are properly grounded.

Contents

Page FCC Information RoHS SJ/T User Information Online Registration Telephone Support User Notice Package Contents Contents 1. Introduction 2. Hardware Setup 3. Operation 4. RS-232Commands Appendix About this Manual Conventions Product Information Introduction Overview Features Requirements Source Device Receiving Device Cables Components Front View Rear View Page Hardware Setup Rack Mounting Page Grounding Installation Operation EDID Learn Pushbutton EDID Mode Selection Installing the RS-232Controller RS-232Commands RS-232Serial Interface Configuring the Serial Port Switch Port CEC Commands Read Commands Baud Rate Setting Commands Reset Commands Verification Appendix Safety Instructions General Page Rack Mounting Technical Support International North America Specifications Limited Warranty