VS1814T / VS1818T User Manual
Reset Commands
Reset the VS1814T / VS1818T to default factory settings using the following command:
Reset Command [Enter]
The following tables show the possible value for the Control command:
Command | Description |
|
|
|
|
reset | Resets to factory default settings |
The following table shows the available command list:
Command | Enter | Description |
|
|
|
|
|
reset | [Enter] | Resets the VS1814T / | |
|
| VS1818T | |
|
|
|
|
Note: The Reset command reverts to the default baud rate, as well as switches on all output devices.
Verification
After entering a command, a verification message appears at the end of the command line as follows:
Command OK - indicates that the command is correct and successfully performed by the device
Command incorrect - indicates that the command has the wrong format and/or values.
18