Chapter 4
RS-232 Commands
Overview
In order to use the RS-232 serial interface to attach a high-end controller (such as a PC) to the VS1814T / VS1818T, use a serial cable such as a modem cable. The end connecting to the VS1814T / VS1818T should have a 9-pin male connector. Connect this to the serial interface on the rear of the VS1814T / VS1818T. Refer to number 4 on the diagram on page 12.
Note: To configure the controller serial port, see page 10.
RS-232 Serial Interface
The VS1814T / VS1818T’s built-in bi-directional RS-232 serial interface allows system control through a high-end controller, PC, and/or home automation / home theater software package.
Configuring the Serial Port
The controller’s serial port should be configured as follows:
Baud Rate | 19200 |
| |
Data Bits | 8 |
| |
Parity | None |
| |
Stop Bits | 1 |
| |
Flow Control | None |
| |
