ATI Technologies 365 OPERATING THE DIRECTIONAL, CONTROLS, NOTE:, ADJUSTMENT, VARIABLE SPEED CONTROL, VALVE is in the ON position, DO NOTEngage the Attachment when TOW

TRACTOR OPERATION

FIGURE 14 Tow Valve Off

DO NOT Engage the Attachment when TOW

VALVE is in the ON position.

VARIABLE SPEED CONTROL

ADJUSTMENT

1. Adjust to slowest speed.

The maximum forward and reverse speeds can be adjusted to meet specific operating conditions by moving the Control Knob, A, in the adjustment slot (See Figure 16).

Adjust to slowest speed set- ting, B, while learning to

operate the machine and when operating in confined spaces.

NOTE: Only adjust the variable speed control when the engine is stopped.

OPERATING THE DIRECTIONAL

CONTROLS

STOPPING MOVEMENT WITH ENGINE RUNNING

1.RELEASE the HYDROSTATIC CONTROL LEVER, A. The lever will automatically go the neutral position as shown (See Figure 15).

2.When the hydrostatic lever is in the neutral position the machine will not move.

FIGURE 15 Stopping Movement

FIGURE 16 Variable Speed Control Setting

ADJUSTING THE VARIABLE SPEED CONTROL

1.Loosen the control knob, A.

2.Move the VARIABLE SPEED CONTROL KNOB forward to the FAST position to increase maximum speed. (Knob shown in fastest position.)

3.Move the VARIABLE SPEED CONTROL KNOB rearward to the SLOW position to decrease maximum speed.

9