ATI Technologies X1950 XTX WARNING, WARNING, 3Remove the computer cover, Installing the graphics card, 1Turn off the computer, monitor, and other peripheral devices

8

36-pin Power Cable Connector

46-pin Power Connection

5Power connector to Graphics Card

6Power connector to Power Supply

Installing the graphics card1Turn off the computer, monitor, and other peripheral devices.

2Unplug the computer’s power cord and disconnect all cables from the back of your computer.

WARNING - Wait approximately 20 seconds after unplugging the power cord before disconnecting a peripheral or removing a component from the motherboard to avoid possible damage to the motherboard.

3Remove the computer cover.If necessary, consult your computer’s manual for help in removing the cover.

WARNING - Remember to discharge your body’s static electricity by touching the power supply or the metal surface of the computer chassis.

4Unscrew or unfasten and remove any existing graphics card from your computer.

Note: If your computer has an on-board graphics capability, you may need to disable it on the motherboard. For more information, see your computer documentation.

5Locate the appropriate slot and, if necessary, remove the metal back- plate cover.

6Align your ATI graphics card with the slot and press it in firmly until the card is fully seated.