Ativa P75234 section

section

Using the Web-Based Advanced User Interface

g and b Mode

In this mode, the Router is compatible with 802.11b and 802.11g wireless

clients simultaneously. This is the factory default mode and ensures

successful operation with all Wi-Fi-compatible devices. If you have a mix

of 802.11b and 802.11g clients in your network, we recommend setting the

Router to g and b mode. This setting should only be changed if you have a

specific reason to do so.

g only Mode

g only mode works with 802.11g clients only. This mode is recommended

only if you want to prevent 802.11b clients from accessing your network. To

switch modes, select the desired mode from the “Wireless Mode” drop-down

box. Then, click “Apply Changes”.

b only Mode

We recommend you DO NOT use this mode unless you have a very specific

reason to do so. This mode exists only to solve unique problems that

may occur with some 802.11b client adapters and is NOT necessary for

interoperability of 802.11g and 802.11b standards.

When to use b only Mode

In some cases, older 802.11b clients may not be compatible with 802.11g

wireless. These adapters tend to be of inferior design and may use older

drivers or technology. Switching to this mode can solve problems that

sometimes occur with these clients. If you suspect that you are using a

client adapter that falls into this category of adapters, first check with the

adapter vendor to see if there is a driver update. If there is no driver update

available, switching to b only mode may fix your problem. Please note that

Changing the Wireless Channel

There are a number of operating channels you can choose from. In the

United States and Australia, there are 11 channels. In the United Kingdom

and most of Europe, there are 13 channels. In a small number of other

countries, there are other channel requirements. Your Router is configured

to operate on the proper channels for the country you reside in. The default

channel is 11 (unless you are in a country that does not allow channel 11).

The channel can be changed if needed. If there are other wireless networks

operating in your area, your network should be set to operate on a channel

that is different than the other wireless networks. For best performance,

use a channel that is at least five channels away from the other wireless

network. For instance, if another network is operating on channel 11, then

set your network to channel 6 or below. To change the channel, select the

channel from the drop-down list. Click “Apply Changes”. The change

is immediate.