59
7.2 WAN – Wide Area Network
WAN refers to your Wide Area Network connection, i.e. your router’s connection to
your ISP and the Internet.
7.2.1 WAN Interface
The factory default settings are configured as following:
WANProfile
Encapsultation PPPoA
Multiplexin
g
V
C-Mu
x
Mode Routin
g
VPI/VCI 8/35
Thorugh this section , is possible to set which interface (ADSL or 3G) use for Internet
connection. It is also possible to active some advanced backup features in order to
maintain an always-on connection in case of failover of the DSL line.
The configuration of 3G interface will be able also without any modem
connected to the WebShare 3G 244WN.
All backup functionalities are able only if ADSL is set as Main Connection.
If the function Failover/Failback is Enable, is necessary to set both
interfaces using Wan Profile menu.
You have to pay particular attention to the WAN-ADSL connection. If you
have any doubt turn to qualified personnel or contact Atlantis-Land
technical assistance.
Atlantis Land will not be considered responsible in case of
wrong or bad configuration.
3G USB Modem is not included with WebShare 244WN.
WebShare 3G 244WN can works only with a compatible device.
Please check the modem compatibility on the website www.atlantis-
land.com or with the compatibility list provided with the WebShare
244WN.