88
Add TCP/UDP Filter
Field Description
Rule name Users-define description to identify this entry or click “Select”
drop-down menu to select existin
g
predefined rules. The
maximum name length is 32 characters.
Time Schedule It is sel
f
-defined time period. You may specify a time schedule
for your prioritization policy. For setup and detail, refer to Time
Schedule section
Source/Destination
IP Address(es)
This is the Address-Filter used to allow or block traffic to/from
particular IP address(es). Selectin
g
the Subnet Mask of the IP
address ran
g
e you wish to allow/block the traffic to or form; set
IP address and Subnet Mask to 0.0.0.0 to inactive the Address-
Filter rule.
Type It is the packet protocol type used by the application, select
TCP, UDP or both TCP/UDP.
Protocol Number Insert the port numbe
r
Source Port This Port or Port Ran
g
es defines the port allowed to be used by
the Remote/WAN to connect to the application. Default is set