ENGLISH

This indicator will light solid green when the

1000 Mbpscorresponding port is connected to a 1000Mbps device.

The Power LED is not lit

•Make sure the AC power Adapter is plugged into an outlet properly and it's connector is plugged into the power jack of the switch.

•Make sure the power source is ON.

•Make sure you are using the included power adapter supplied with your switch.

The Link/Act LED is not lit when a device is connected to the corresponding port

•Make sure that the cable connectors are firmly plugged into the Switch and the device.

•Make sure the connected device is turned on and its adapter is installed correctly and is working.

•The cable must be less than 100 meters long.

3.6 Rear Panel

The rear panel of the NetMaster G16/24 only features a power receptacle, which is an AC power receptacle. Connect the female of the power cord head here, and the male head to the AC power outlet.

4 Product Support

If you have any problems with this device, please consult this manual. If you continue to have problems you should contact the dealer where you bought this device. If you have any other questions you can contact the Atlantis Land company directly at the following address:

Atlantis Land SpAViale De Gasperi, 122

23