IP Wireless Security Motorized Camera
•Bit Rate: You can setup bit rate of the image by selecting Kbps or Mbps. The setting range is 4Kbps~3Mbps. The higher setting can obtain better quality; however, it will use more resource within your network.
•Camera Name: You can change the name of the camera.
-Light Frequency: Adjust the light frequency to suit your area of operation from the options either 50 Hz or 60 Hz (default).
Location Setting
Click the Location Setting item of the Video submenu to bring up the following page, which allows you to setup the video control settings of the camera.
-Upside Down: Display the image in a vertical mirror mode.
-Mirrored: Display the image in a horizontal mirror mode.
-Location: When you have saved the position in the camera, select the location from the pull- down list, and then click Apply. The camera’s lens will move to the location immediately.
Motion Detection
Click the Motion Detection item of the Video submenu to bring up the following page, which allows you to setup the motion detection settings of the camera.
20 |