IP Wireless Security Motorized Camera
Chapter 6
Hardware Installation
This section describes the Hardware installation procedure for the IP Wireless Security Motorized Camera.
6.1 Attach Wireless Antenna
From the rear panel of the IP Wireless Security Motorized Camera , screw the external Antenna that came with the IP Wireless Security Motorized Camera into the antenna connector.
6.2 Connect an Ethernet cable and Power Supply
Connect an Ethernet cable to the network cable connector located on the camera’s rear panel, and then attach it to the network.
Attach the external power supply to the DC power input connector located on camera’s rear panel, and then connect it to your local power supply. You can confirm power source is supplied from the Power LED on the camera is illuminated.
9 |