IP Wireless Security Motorized Camera

Advanced J Wireless

If you use a wireless camera, you can configure the respective settings in the Wireless submenu, which contains two options: Setting and Site Survey.

Setting

Click the Setting item of the Wireless submenu to bring up the following page.

-Wireless: The default setting is Disable. Select Enable/Disable to start/stop the wireless function of the camera.

-Connection Mode: Use this option to determine the type of wireless communication for the

camera. There are two choices: Infrastructure mode and Ad-Hocmode.

-SSID: SSID (Service Set Identity) is the name assigned to the wireless network. It will auto- detect and display the SSID of wireless network connected in this box. This default setting will let the camera connect to ANY access point under the infrastructure network mode.

-Channel: This pull-down menu provides the wireless channel for communication. A “channel” is a range of frequencies to be used in communication between the camera and access point in Infrastructure mode, or the camera and PC/Notebook in Ad-Hoc mode. Select the appropriate channel from the list provided depending on the regulatory region where the unit is sold.

-Security Mode: Wireless network communications can be intercepted easily. This option will help you protect your wireless network.

-Authentication: Open communicates the key across the network. Shared allows communication only with other devices with identical WEP settings.

-Encryption Mode: This option allows you to configure the setting of data encryption. The WEP key must be set before the data encryption is enforced.

-Key Format: To enable WEP Encryption, you should decide the encryption format first by selecting the ASCII or HEX option, and then input the WEP key (in the following Key 1~4 box).

A02-IPCAM2-W54_ME01

24