Atlantis Land A02-IPCAM2-W54 manual 77

IP Wireless Security Motorized Camera

Question		Answer
I cannot access the IP		Another possible reason is the IP Address is located on a
Wireless	Security	different subnet. To fix the problem, run the PING utility
Motorized Camera from		(follow the instructions in Appendix B - PING Your IP
a web browser.		Address). If the utility returns “no response” or similar, the
		finding is probably correct, then you should proceed as
		follows:-
		In Windows 95/98/2000 and Windows NT, double check the
		IP Address of the IP Wireless Security Motorized Camera is
		within the same subnet as your workstation.
		Click “Start”, “Setting”, “Control Panel”, and the “Network”
		icon.
		Select TCP/IP from the “Network” dialog box and from the
		“TCP/IP Properties” dialog box click “Specify an IP address”.
		If the IP Wireless Security Motorized Camera is situated on a
		different subnet than your workstation, you will not be able to
		set the IP address from this workstation. To verify make sure
		the first 3 sections of the IP address of the IP Wireless
		Security Motorized Camera corresponds to the first 3 sections
		of the workstation. Therefore the IP address of the IP
		Wireless Security Motorized Camera must be set from a
		workstation on the same subnet.

Question		Answer
I cannot access the IP		Other possible problems might be due to the network cable.
Wireless	Security	Try replacing your network cable. Test the network interface
Motorized Camera from		of the product by connecting a local computer to the unit,
a web browser.		utilizing a standard Crossover (hub to hub) Cable. If the
		problem is not solved the IP Wireless Security Motorized
		Camera might be faulty.

Question			Answer
Why	does	the Power	The power supply used might be at fault. Confirm that you
LED	not	light up	are using the provided power supply DC 5V for the IP
constantly?			Wireless Security Motorized Camera and verify that the
			power supply is well connected.

A02-IPCAM2-W54_ME01 68