ENGLISH
•Remote Private Network Name
Plug the remote HomePlug AV when changing the Private Network Name.
To change the Private Network Name of a remote HomePlug AV:
1.Open HomePlug AV Utility.
2.Click Encryption tab.
3.Enter the new Private Network Name. This field is case sensitive.
4.Select Change Private Network Name of remote device.
5.Enter the Device ID of the remote device. The Device ID is printed on the device.
6.Click Apply. The remote HomePlug AV restarts and saves the new password.
7.Power cycle the local HomePlug AV. To power cycle, you need to turn the HomePlug AV off and then on again.
To effectively communicate with each other, all HomePlug AVs in the network should maintain a similar Network Password.
If you have multiple HomePlug AVs, you have to set the Network Password of each HomePlug AV from the same computer before using them with other devices.
The remote HomePlug AV should be plugged when changing the Network Password.
To effectively communicate with each other, all HomePlug AVs in the network should maintain a similar Network Password.
46