Atlantis Land A02-PSU_GX02 quick start Cabling

ENGLISH

1.5 Cabling

Follow these steps for a trouble-free start of the print server operations with your print server.

1.Confirm proper operation of the printer to be connected to the print server.

2.When you have confirmed proper operation of the printer, turn off its power.

3.Confirm that your network is operating normally.

4.Connect the print server to the network (through the RJ- 45 connector of the print server).

Configuration problems may result if the print server is powered up without first establishing its network connection. Please follow this procedure to avoid complications at the configuration stage.

5.While the printer is powered off, plug the print server to the printer (parallel or USB interface).

6.Turn on the printer’s power.

7.Connect the DC end of the AC Power adapter to the DC power input socket of the print server and the AC end to the wall outlet. This will supply power to the print server immediately.

Your print server is built with a default IP Address. To prevent from any conflict in your network, it is recommended to use the PS-Utility program to change the IP setting when there is some other device’s IP Address is the same as the print server’s default IP Address.

20