ENGLISH

1.6 Using The Utilities

This section describes the software utilities for the print server:

PS-Utility

PS Wizard

1.6.1Installing PS-Utility

Follow the procedure outlined below to install PS Utility:

1.Insert the print server’s Installation CD into the CD-ROM drive.

2.Click Install Utility from the Auto-Run menu screen.

3.Once executed, the Setup program will extract files to launch the InstallShield Wizard; then, follow it step by step to complete the installation process

After installing the utility, the application program for the print server is automatically installed to your computer, and creates a folder in Start\Programs\PS-Utility. Now, you can begin using PS Utility.

To avoid the conflict in your network, you can use PS-Utility to change the related settings of your print server (such as the IP address) after finishing the installation.

1.6.2 Launching PS-Utility

To launch PS Utility:

1.Click Start -> Programs -> PS-Utility, and then click the PS-Utility v3.11 item.

21

Page 20
Image 20
Atlantis Land A02-PSU_GX02 Using The Utilities, PS-Utility PS Wizard Installing PS-Utility, Launching PS-Utility