Atlantis Land A02-RA2 ME01 manual Static IP for WAN IP RFC 1483 Routed, PPPoA RFC, PPPoE RFC

AtlantisLand I-Storm Lan Router ADSL

2.Encapsulation: 1483 Bridged IP LLC

3.Bridged: Disabled

4.NAT Configuration: Dynamic NAPT

Please see scenario 2: Router Mode Configuration with Dynamic IP in Appendix for more detail configuration.

8.2 Static IP for WAN IP (RFC 1483 ROUTED)

Following settings are necessary when working under this mode:

1.VPI/VCI

2.Static IP Address: provided by ISP

3.Subnet Mask: provided by ISP

4.Default Gateway: provided by ISP

5.Encapsulation: 1483 Bridged IP LLC or 1483 Routed IP LLC (provided by ISP)

6.Bridged: Disabled

7.NAT Configuration: Dynamic NAPT

8.Preferred DNS server: IP is Provided by ISP

Please see scenario 3: Router Mode Configuration with Static IP in Appendix for more detail configuration.

8.3 PPPoA ( RFC 2364)

PPPis a widely used protocol for controlling a point-to-point link. It is used by existing ISPs (Internet Service Providers) in providing dial-in services for the Internet. It can be used over a variety of physical media to transport IP data, MAC data, and many other data types. Components of PPP have been defined which provide option negotiation, compression, encryption, authentication and multi-link facilities. For xDSL deployment, authentication is probably the single most important of these.

Following settings are necessary when working under this mode:

1.VPI/VCI

2.Encapsulation: PPPoA VC-Mux

3.Bridged: Disabled

4.PPP User Name: Provided by ISP

5.PPP password: Provided by ISP

6.NAT Configuration: Dynamic NAPT

Please see scenario 4: Router Mode Configuration PPPoA in Appendix for more detail configuration.

8.4 PPPoE ( RFC 2516)

Following settings are necessary when working under this mode:

1.VPI/VCI

2.Encapsulation: PPPoE LLC

16