3.Bridged: Disabled
4.PPP User Name: Provided by ISP
5.PPP password: Provided by ISP
6.NAT Configuration: Dynamic NAPT
Please see scenario 5: Router Mode Configuration PPPoE in Appendix for more detail configuration.
8.5 Classical IP over ATM ( RFC 1577)
Following settings are necessary when working under this mode:
1.VPI/VCI
2.Static IP Address: provided by ISP
3.Subnet Mask: provided by ISP
4.Default Gateway: provided by ISP
5.Encapsulation: Classical IP over ATM
6.Bridged: Disabled
7.NAT Configuration:Dynamic NAPT
8.Preferred DNS server: IP is Provided by ISP
LAN Configuration
The LAN configuration page allows user to set the configuration for the LAN port.
LAN IP Address & Subnet Mask: The default is 192.168.1.254 and 255.255.255.0. User can change it to other private IP address, such as 192.168.1.2, and 255.255.255.0.
•DHCP Server
System Allocated: The DHCP address pool is based on LAN port IP address plus 12 IP addresses. For example, the LAN IP address is 10.0.0.2; the DHCP address pool is at the range of 10.0.0.3 to 10.0.0.14.
User Defined: The DHCP address pool is at the range of User Defined Start Address and User
Defined End Address. The maximum pool size can be 253 IP addresses: 255 total IP addresses
– 1 broadcast address – 1 LAN port IP address.
Lease time: The Lease time is the amount of time of a network user will be allowed to connect with DHCP server. If all fields are 0, the allocated IP addresses will be effective forever.
User mode: Under the Single User mode, the DHCP server only allocates one IP address to local PC. Under the Multiple User mode, the DHCP server allocates the IP addresses specified bye the DHCP address pool.
17
