I-Storm Lan Router
Manual
1.1 Introduction to Ethernet Router
The I-Storm Lan Router ADSL is optimized to address the growing demand for high-speed Internet access. With both a USB 1.1-complient interface and an IEEE 802.3-complient Ethernet interface, it provides the widest array of connectivity options without relaying on host PC drivers.
The I-Storm Lan Router ADSLis an “always-on” high-speed broadband connection to the internet. Using existing twisted-pair telephone lines, ADSL technology provides data rates more than 100 times as fast as a traditional analog modem, without an interruption in telephone service. The I-Storm Lan Router ADSL is fully compliant with the full-rate ADSL(T1.413 Issue 2 and G.dmt) and the splitterless G.lite (G.992.2) standards. With data transfer rates of up to 8 Mbps downstream and 1Mbps upstream.
1.2 Product Features ADSL Compliance
Compliant with ADSL standards
•Full-rate ANSI T1.413 Issue 2 and ITU G.dmt(G.992.1) standards
•Splitterless ITU G.lite ( G.992.2 ) specification
•ITU G.994.1(G.hs)
•Annex A
•DMT modulation and demodulation
•Full-rate adaptive modem
•Maximum downstream rate of 8 Mbps
•Maximum upstream rate of 1 Mbps
•Tone detection for low power mode
•Support splitterless ADSL implementation
•Dying GASP
ATM Protocols and Encapsulations
•WAN mode support: PPP over ATM (RFC2364) and PPP over Ethernet (RFC2516)
•LAN mode support: bridged/routed Ethernet over ATM (RFC 1483)
•ATM forum UNI 3.1 / 4.0 PVC
•8 PVCs (simultaneous and encapsulation independent )
•ATM SAR ( segmentation and reassembly)
•ATM AAL5 ( adaption layer type 5 ) UBR & CBR
•OAM F4/F5
•VPI/VCI range 0-255,0-65536
