ENGLISH

For more detailed instructions on configuring and using the WebShare VPN Router ADSL2+, please refer to the online manual.

Before beginning the configuration of the Router you have to know the parameters of your subscription ADSL.

There are four ways ￿ PPPoE, PPPoA, RFC1483 routed, RFC1483 Bridge￿ for the device to have a public IP address and then to access Internet. You have to check with your ISP about which way is adopted.

VPI/VCI: Consult the telephone company to get the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) numbers. The valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535. The default value VPI is 0 and VCI is 32.

For BT (VPI=0, VCI=38) and for KC (VPI=1, VCI=50). NAT: The NAT feature allows multiple-user Internet access for the cost of a single IP account. If you need to have a public server or a public network, NAT has to be disabled. Encapsulation Method: Be sure to use the encapsulation method (LLC/SNAP or VC MUX) required by your ISP. Gather the information as illustrated in the following table and keep it for reference.

 

 

 

 

 

PPPoE

 

VPI and VCI

 

 

VC-based / LLC-based multiplexing

 

 

 

 

 

 

Username and Password

 

 

 

Service Name

 

PPPoA

 

VPI and VCI

 

 

VC-based / LLC-based multiplexing

 

 

 

 

 

 

Username and Password

 

RFC1483

VPI/VCI

 

VC-based / LLC-based multiplexing

 

Bridged

 

 

 

 

 

 

25