ENGLISH
Router ADSL2+ and then to the socket. The product will carry on immediately a diagnosis (60 seconds). Finished this the Led PWR, SYS (eventually even the Led LAN, if connected to PCs) will be fixed green. The Led ADSL, if suitably connected, at first will be flashing and then it will remain fixed. If the LED ADSL continually flashes You have to read Note (into section 1.8) in order to solve this problem
1.5 Default Settings
The WebShare VPN Router ADSL2+ can be configured with your Web browser. The web browser is included as a standard application in following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, etc. The product provides a very easy and
Before Configuration
This section describes the configuration required by LAN- attached PCs that communicate with the WebShare VPN Router ADSL2+, either to configure the device, or for network access. These PCs must have an Ethernet interface installed properly, be connected to the WebShare VPN
Router ADSL2+ either directly or through an external Switch, and have TCP/IP installed and configured to obtain an IP address through a DHCP server or a fixed IP address that must be in the same subnet of the WebShare VPN Router ADSL2+. The default IP address of the WebShare VPN Router ADSL2+ is 192.168.1.254 and subnet mask is 255.255.255.0. The best and easy way is to configure the PC to get an IP address from the WebShare VPN Router ADSL2+ (DHCP client).
Please follow the steps below for PC’s network environment installation. First of all, please check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to MS Windows relative manuals.
29