ENGLISH

These are configuration parameters:

•Virtual Circuit: Enable

•VPI: 0 or 1 (check with your ISP)

•VCI: 38 or 50 (check with your ISP)

•NAT: Enable

•Username: Enter the username provided by your ISP(case sensitive).

•Password: Enter the password provided by your ISP (case sensitive).

•Service Name: This item is for identification purposes. If it is required, your ISP will provide you the information.

•IP Address:0.0.0.0

•Authentication Protocol Type: Default is Chap (Auto). Your ISP will advise you whether to use Chap or Pap.

•Connection: Chose Always On If you want the router to establish a PPPoE/A session when starting up and to automatically re-establish the PPPoE/A session when

36