WebShare RB300

A.3 Login

If you forget the password to log in.

Steps

1

2

3

CORRECTIVE ACTION

The Reset function is to reset the setting back to factory default setting, once you p seconds, the LED of the WLAN will turn off. And when the device is ready, the WLAN LED will start blinking.

Before configurating this Wireless Broadband Router, you need to know the following default settings.

Username: adminPassword : adminIP Address : 192.168.1.1Subnet Mask : 255.255.255.0Wireless: SSID= default, Channel=6, WEP=disable

To increase security level, it is important change password after first configuration.

A.4 Remote Management

Ican’tthemanagedvice remotely.

Steps

CORRECTIVE ACTION

1Make sure to insert Router ADSL IP in Default Gateway field of Wireless Broadband Router.

2Make sure that ADSL Router is correctly configured (create a port forwarding from port TCP 80 to Wireless Broadband Router IP Address).

Pag. 70