WebShare RB300
1.3 Technical Features
WebShare RB300 provides the following features:
∙Compliant with 802.11n (draft), IEEE 802.11g and 802.11b Devices
∙
∙
∙Supports Cable/DSL Modems with Dynamic IP, Static IP, PPPoE, L2TP, PPTP or BigPond Connection Types
∙DHCP Server Feature Allocates up to 253 Client IP Addresses
∙Supports
∙Supports WPA, WPA2,
∙Supports MAC Address, Protocol Filters and UPnP (Universal Plug & Play)
∙Traffic Control with Virtual Server, Virtual PC mapping and DMZ
∙Provides Additional Security with SPI / NAT firewall and Attack Alert via emails
∙Provides Additional Security of Enable/Disable SSID, Password Protection
∙Flash Memory for Firmware Upgrade, Save/Restore Settings, and Traffic Log
∙Compliant with Windows 95/98/NT/2000/XP, Linux and Mac OS
∙Easy Management and Remote Management via Web Browser (HTTP)
∙High speed data transfer rate
∙NAT for sharing 1 IP address to all LAN/WLAN users.
∙WPS
1.4System Requirements
Before installing the device, your PC should meet the following:
∙Intel® Pentium®III 600Mhz or compatible processor with TCP/IP stack
∙Iinternet Explorer V6.0 on Netscape V6.0
∙CDRom
1.5Setup
The setup of the Wireless Broadband Router can be performed properly using the following methods:
∙The power outlet should be within 1.82 meters (6 feet) of the Broadband Router.
∙Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.
Pag. 2