NetComm Installation Guide, Software Installation, Overview, NP545 User Guide, YML866Rev1

Chapter 2 - Installation Guide

2.1 Software Installation

2.1.1 Overview

The Adapter’s Setup Wizard will guide you through the installation procedure for Windows 98SE, Me, 2000 and XP. The Setup Wizard will help you install the Utility and drivers.

If you install the hardware before the software, you will be prompted “Found New Hardware Wizard”, click the Cancel button, and run the Setup Wizard program on the CD-ROM. The Setup steps for Windows 98SE, Me, 2000 and XP are very similar. The following setup steps are for Windows 2000.

2.1.2Software Installation for Windows 2000

1.Insert the Resource CD into your CD-ROM drive, click the Start button and choose Run. In the field that appears, enter F:\software\Setup.exe (“F” is the letter of your CD-ROM drive)., figure 2-1 should then appear.

2.You can click the Cancel button to abort the installation on the Preparing Setup screen, figure 2-1. Otherwise, the Setup Wizard will display a screen similar to that shown in figure 2-2 after a moment.

Figure 2-1 Preparing Setup

3.To continue, click the Next button on the screen, figure 2-2. Click the Cancel button to abort the Installation.

Figure 2-2 Start Setup

NP545 User Guide	YML866Rev1
	www.netcomm.com.au