2.Edit the Authentication and Security tab
Figure 3-3 Add Profile – configuration
•Authentication Type – Three options, Open System, Shared-Key System, LEAP, WPA/WPA2, WPA-PSK, WPA2-PSK.
•802.1x Setting – It enables when Authentication Type is setting to WPA/WPA2.
•Encryption – Displays which encryption type that the driver is using. When you select Open System, Shared-Key System as Network Authentication, there are two options: WEP and Disabled. If you select WPA-PSK as Network Authentication, there are TKIP and AES options instead of WEP and Disabled.
•Wep Key – Key #1, Key #2, Key #3, Key #4, the Key groups. You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F) or 5 ASCII characters for 64-bit (also called 40bits) encryption. You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F) or 13 ASCII characters for 128-bit (also called 104bits) encryption.
•WPA Preshared key – When you select WPA-PSK or WPA2-PSK Authentication, you need to enter the WPA Preshared key. This key can be from 8 to 63 characters and contain special characters and spaces.
