3.2 Link Status
The Link Status tab displays the adapter’s current status.
Figure
The following table describes the items found on the Network Status screen.
•Status – Shows whether the station is connected to the wireless network, if not connected, display RF is closed; if connected, display AP name and BSSID.
•Extra Info – Shows link status and the current channel in use.
•Link Speed – Shows the current max Transfer rate, unit is Mbit/sec.
•Throughput – Displays Tx and Rx rate, unit is Kbits/sec.
•Link Quality – Shows the quality of the signal.
•Signal Strength – Shows the strength of the signal.
•Noise Level – Shows the signal noise level.
YML866 Rev1 | NP545 User Guide |
www.netcomm.com.au | 11 |
